Cisco 1240 1130 1140 AP LWAPP to Autonomous mode conversion

 HOW TO CHANGE CISCO AP FROM LWAPP TO AUTONOMOUS

1.  Download the IOS

2.  Make sure on File options change view settings to hide extensions for known               file types.
3.  Rename the file .default example ;

For 1240 AP;   c1240-k9w7-tar.default

For 1130 AP;   c1130-k9w7-tar.default

4.  Connect PC LAN interface to Access Point LAN interface

5.  Change PC IP address to 10.0.0.2 or above

6.  Start TFTP server and ensure folder is correct

7.  Boot up the AP and hold the mode button for 30 seconds

8.  Ensure message on console says waiting for mode to be released

9.  That’s it! Wait for IOS to upload and extract