CISCO SWITCH ACCESS PORT CONFIGURATION

SWITCHING LAB 1

Objective of the lab is to configure layer 2 access ports and assign them to a VLAN 100.   

1. Create VLAN 100 on SW1
2. Configure SW1 fast Ethernet port  0/1 as layer 2 access port in VLAN 100
3. Configure SW1 fast Ethernet port  0/2 as layer 2 access port in VLAN 100
4. Configure R1 GIG 0/0 with IP address of 10.1.1.1/24
5. Configure R2 GIG 0/0 with IP address of 10.1.1.2/24
6. Ping from R1 to R2